Formatting rules for the article

Article design rules

INFORMATION FOR AUTHORS

  General requirements for submission of materials

      The editors accept materials in Uzbek, Russian and English. Materials submitted in English are published in the journal in the original; only the abstract is translated into Russian.

      Materials are accepted for consideration through the electronic service http:// www.history.kiut.uz

When registering online, you must follow the step-by-step instructions for uploading files. Once uploaded, the system will automatically convert them into one PDF file that will be used in the review process. Before sending, we recommend that you check the correct display of the presented materials, tables, and illustrations.

The editors do not accept materials for publication without a recommendation (letter) from a scientific or scientific-production organization, the name and address of which is indicated in the manuscript.

It is recommended to divide the text of the article into sections with headings such as: introduction and statement of the problem, methods and materials, research results, discussion, conclusion, literature (references).

The manuscript must be finally reviewed and approved by all co-authors.

When using abbreviated names in the text, their explanation should be given at the first mention.

Review articles are submitted to the journal solely by invitation (order) of the editors.

Since articles for review are sent to authors only by email, in the case where an article has only one author, it is advisable to indicate an alternative email address in case of possible technical problems. As an alternative, it is recommended to specify a mailbox that is checked during vacation or business travel. If an article has multiple authors, it is advisable to include the email addresses of two or three authors who regularly check incoming messages.

  1. Requirements for the elements of the article

  The title of the article is as specific and informative as possible. The title of the article must strictly correspond to its content, be concise, simple and unambiguous for translation into English/Russian.

A complete list of authors (initials and surnames), it is necessary to indicate which of the authors is responsible for the correspondence.

Place of work of the authors. Full (without abbreviations) name of the organization, indicating the postal code, city, country in Russian and English. If the authors work in different organizations, then it should be clear who works in which organization.

Email address and telephone number of the author (or authors) responsible for correspondence.

Abstract of the article (in Russian and English). The abstract of the article, up to 200 words, should be informative and detailed, describing the methods and main results of the study. The abstract should not contain references to other works. It should be clear from the abstract what questions were posed for the study and what answers were obtained. The use of abbreviations and symbols in abstracts is not permitted.

Keywords (in Russian and English) should contain no more than 8 words or short phrases that accurately reflect the content of the article, but, if possible, do not repeat its title.

  1. Technical requirements for design

All text files, including tables, must be prepared in the Microsoft Word for Windows text editor in .doc or .docx formats. Page format A4, margins on all sides - 2.0 cm. Text must be black, line spacing (except for tables and references) - at least 1.15. Paragraph indent – 1.00. All text is typed in Times New Roman font, size 14.

3.1. Main text

You must upload a Word file with the text of the article, including a list of cited literature. The text is preceded by a title indicating the team of authors and its affiliation. The title is written in capital letters, bold and centered (Times New Roman font, font size 14, no dot at the end). Next, one line is skipped and the co-authors of the article are listed, separated by commas (font Times New Roman, font size 12, bold, centered). The initials are written in front, then the surname (B. Aminov, N. Narziev). After the surname of each author there is a footnote with the organization number (if the organization is the same for all authors, the number should not be included); An asterisk is placed after the surname of the author, whose email address is provided for contacts. Skip the line again and provide the name and address of the affiliated organization in Times New Roman font, font size 10, centered. Each organization is written on a new line, centered, and if necessary, entries are numbered.

The abstract and keywords of the article are typed in Times New Roman font, size 11. Below is the translation into English: the title of the article, the names of the authors, the names and addresses of the organizations in which the work was carried out, the e-mail address of the author responsible for correspondence, the abstract (abstract) (translation must be of high quality and competent, up to 200 words) and keywords.

After the keywords, skipping the line, the PACS number most corresponding to the materials of the article is presented (text typed in Times New Roman font, font 11, all capitals).

The main text is separated from the title by a blank line. The title of the sections of the article is typed in bold and capital letters, centered, without a period at the end and separated from the previous section by a blank line (Times New Roman font, font size 11). Section subheadings are typed as the hierarchy deepens, first in bold italics, then in regular italics, then in regular font with underlining, centered, no dot at the end.

3.2. Photos and tables

Photos are accepted only in computer format, size 7x7 cm (large drawings no more than 13x13 cm) in formats like bmp, gif, eps, tiff, ps, etc. Drawings must have a resolution of at least 300 dpi. For graphs, you should use standard programs such as Origin, which allow you to edit them if necessary.

Captions for figures (font Times New Roman 10 pt) must compensate for the minimum of alphabetic and numerical symbols presented in the figure. The entry begins with the figure number, which is written briefly with a capital letter in bold font (Fig.), followed by a dot. Figures are located in the text of the article after the first mention of them. Each drawing is additionally presented as a separate graphic file with a resolution of at least 300 dpi (dots per inch) in TIFF format (TIFF files must be saved without compression and have an actual size of at least 100x100 mm); The name of the drawing file must contain the surname of the first author and the drawing number (for example, makarova_1.tiff).

Tables are numbered in the order in which they are mentioned in the text using Arabic numerals. The table name should follow the number. All columns in the table must have headings and be separated by vertical lines. Abbreviations of words in tables are not allowed. The use of other formats, including Microsoft Excel, is not permitted. The caption to the table is located in the center, the word “Table” and the number are typed in italics on the right side, the table name is typed in bold with a capital letter on a new line, there is no period at the end (Times New Roman 10 pt font). The table should be located in the text of the article immediately after the mention or as close as possible to the place of the first mention. The reference in the text to the table is given in the format - table. 1.

3.3. List of used literature

The list of used literature is typed in Times New Roman font, size 11. The list of references should be compiled in the order of citation in the text and located at the end of the article. The serial numbers of references in the text must be written inside square brackets (for example: [1], [2]).

The literature must contain at least 25 references (of which it is advisable to indicate at least 15 references to scientific articles from journals). The literature should include links to current scientific works of Uzbek and foreign experts, primarily articles published over the past 10–15 years in peer-reviewed scientific periodicals (primarily included in the Scopus and WOS databases). Unreasonable self-citation should be avoided; in most cases, the level of self-citation should not exceed 20–30%. After the list of references, its transliteration is given in the References section. Transliteration and translation of the title is used only for Russian-language sources from the list of references. English-language sources are repeated in the References section without changes. In literature and References, indicate the DOI (Digital Object Identifier) of the publication at the end of each link (if available).

The list of references indicates: the name (or initial) and then the surname of all authors, the title of the article (or chapter, conference article, patent, etc.) should be in quotation marks, the name of the journal or book should be in italics, volume, number , numbering of the first and last pages separated by a hyphen, year of publication.

Examples of design are given below:

Journal article: I.O.F. all authors, “Title of article”, Title of journal, Volume, Number, page, year.

Book: Full name authors, book title. Place: Publishing company, year, page.

For example: [15] Salishchev K.A. Cartography. – M.: Moscow University Publishing House, 1976. – P. 13-14

Article or thesis in the collection: I.O.F. authors, “Title of the article”, in Title of the conference collection, year., p.

 

Editorial board

EXAMPLE OF DESIGN

Dynamics of magnetization in an array of three-layer nanodisks

  1. Aminov

Tashkent Kimyo International University

Uzbekistan, Tashkent city, Shota Rustaveli street, 156,

tel.: +998 8 78 129 40 40

e-mail: sitmihr@yahoo.com

  Annotation. The abstract of the article, up to 200 words, should be informative and detailed, describing the methods and main results of the study. The abstract should not contain references to other works. It should be clear from the abstract what questions were posed for the study and what answers were obtained. The use of abbreviations and symbols other than generally accepted ones is not allowed. Any bibliographical references are not allowed. The abstract and keywords of the article are typed in Times New Roman font, font size 11.

Keywords: they should contain no more than 8 words or short phrases that accurately reflect the content of the article, but, if possible, do not repeat its title. They are separated by commas.

 Abstract. A translation of the abstract into English of up to 200 words is provided. The translation must be of high quality. When translating the abstract, English-language special terminology must be used. The English version should not be a mechanical translation of the Russian text, but should provide an understanding of the essence of the work for foreign readers.

Keywords: Translation of keywords into English.

 INTRODUCTION

This section includes:

  • Relevance of the research topic;
  • a brief review of the literature on the research topic;
  • statement of the research problem;
  • statement of the objectives of the presented article;
  • formulation of those specific tasks that the authors solve to achieve them.

METHODS AND MATERIALS

This section should contain a description:

  • experimental or theoretical methods used by the authors in their work;
  • materials from laboratory or field research, network observation data or other materials used in the work, or information borrowed from literary scientific sources. All methods and materials that are not original copyrights must be provided with links.

 

RESULTS AND ITS DISCUSSION

This section presents the actual results of the study (text, tables, graphs, diagrams, equations, photographs, drawings) and the interpretation of the study results, including:

- compliance of the results obtained with the research hypothesis;

- limitations of the study and generalization of its results;

- proposals for practical application;

- suggestions for future research directions.

 

CONCLUSION

Contains brief summaries of sections of the article without repeating the wording given in them.

LITERATURE

[1]

[2]